Gateway SYSMAN017AAUS Manual De Usuario

Disable

shuts off password protection

select (can only be selected if password is currently
enabled); press Enter; type old password; press Enter.

Enables

turns on password protection

select (can only be selected if password is currently
disabled); press Enter; type new password, press En-
ter; type new password again; press Enter.

Change

changes password

select (can only be selected if password is currently
enabled); press Enter; type old password, press Enter;
type new password, press Enter; type new password
again; press Enter.

This menu allows you to designate port assignments for
the system. Access this menu from the Main Setup Menu
(See page 25.)

The following chart details the process for setting the
Port Assignment Menu options. (After setting options,
the screen automatically returns to the Main Setup Menu.):

Serial Port

select; press Spacebar to toggle between:
COM1; COM2; COM3; COM4; or DISABLED.

IR Port

select; press Spacebar to toggle between:
COM1; COM2; COM3; COM4; or DISABLED.

Parallel Port

select; press Spacebar to toggle between: LPT1; LPT2; LPT3; or DISABLED.

Parallel IRQ

select; press Spacebar to toggle between: IRQ5or IRQ7.

Parallel Port

select; press Spacebar to toggle between: AT or BI-DIRECTIONAL.

General Audio

select; press Spacebar to toggle between: ENABLED or DISABLED.

Audio Base Port

select; press Spacebar to toggle between: 220h; 230h; or 240h.

Audio and MIDI IRQ select; press Spacebar to toggle between: IRQ5; IRQ2; IRQ10; IRQ5 &IRQ2;

IRQ5 & IRQ11; IRQ10 & IRQ2; or IRQ10 & IRQ 11.

PC Speaker Audio

select; press Spacebar to toggle between: ENABLED or DISABLED.

Audio DMAC

select; press Spacebar to toggle between: DMA0 or DMA1.

MPU-401 Base Port select; press Spacebar to toggle between: 300h; 320h; 330h; or DISABLED.