Fujitsu 200 Manual De Usuario

Infrared Data Transfer Is Not Working

6

If you are experiencing problems transferring data between Windows CE-based 
devices, note the following:

• Transfer only one file, or no more than 25 contact cards at a time. For more 

information on contact cards, reference the section of Chapter 3 entitled 
“Contacts: Tracking Friends and Colleagues”.

• Can the IrDA port on the pen tablet “see” the IrDA port on the other device? A 

direct line-of-sight path must exist between the IrDA port on the pen tablet and 
the IrDA port on the other device. 

• The distance between the two devices must be less than 3 feet (1 meter), but more 

than two inches.

• The viewing angle from the IrDA port on the pen tablet must not be more than 15 

degrees from a center line between the IrDA port on the pen tablet and the IrDA 
port on the other device. 

• Adjust the room lighting. Some types of light interfere with infrared 

communication (including direct sunlight). Try moving to a different location or 
turning off some lights.

Pen Tablet Is Not Responding to the Pen

6

If your pen tablet is not responding to the pen, check the following: 

• Ensure that the pen tip is clean. Replace the pen if it is damaged. 

• If available, connect a USB-style mouse to the system to see if it responds to click 

commands. If the system doesn’t respond to the mouse, the application or system 
may have crashed, and it may be necessary to reset the system.

Pen Tablet is Not Responding to the Keyboard

6

If the pen tablet is not responding to the keyboard, check the following:

• Make sure that you suspend and then resume the system before attempting to use 

the keyboard, otherwise it may not be recognized. 

• Be sure that you are using a 5V keyboard.