Gateway p-79 Manual De Usuario

154

Devices

The notebook doesn’t enter standby mode after 
closing the LCD.

■

Make sure that the magnet is in the magnet holder. For more 
information, see 

■

Test or replace the system board.

The system doesn't resume from hibernation 
mode.

■

Check the hard disk connection to the system board.

■

Test or replace the hard disk drive.

■

Test or replace the system board.

The system doesn't resume from standby mode 
after opening the LCD.

■

Make sure that the magnet is in the magnet holder. For more 
information, see 

■

Test or replace the system board.

The battery fuel gauge in Windows doesn’t go 
higher than 90%. 

■

Remove the battery pack and let it cool for two hours.

■

Refresh the battery (use only battery power until the notebook turns 
off, then charge the battery).

■

Test or replace the battery pack.

■

Test or replace the system board.

The system hangs intermittently.

■

Reconnect the hard disk drive and optical drive.

■

Check the hard disk connection to the system board.

■

Test or replace the system board.

Symptom / Error

Action in Sequence

System configuration does not match the 
installed devices. 

■

Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot 
the notebook.

■

Reconnect the hard disk drive and optical drive.

The external display does not work correctly.

■

Press Fn+F4 repeatedly to switch between LCD, external display, and 
both displays.

■

Test or replace the system board.

USB does not work correctly.

■

Test or replace the USB board.

■

Test or replace the system board.

Printer problems.

■

Run the printer self-test.

■

Reinstall the printer driver.

■

Test or replace the printer cable.

■

Test or replace the printer.

■

Test or replace the system board.

Symptom / Error

Action in Sequence