Gateway p-79 Manual De Usuario

68

Replacing the CMOS battery

Tools you need to complete this task:

v

Screws removed during this task:

•

 2 blackM2x3 (IEEE 802.11 wireless card)

To replace the CMOS battery:

 

1

.

2

Remove the optional IEEE 802.11 wireless card by following the instructions in 

3

Disconnect the old battery from the system board.

•

Lift the old battery off of the system board.

•

Connect the new battery to the system board, then place the battery on the 
system board.

4

Replace the optional IEEE 802.11 wireless card by following the instructions in 

Important

Use only CMOS batteries designed for this Gateway notebook.

Important

The battery is held in place by double-sided tape.

Important

Use double-sided tape to hold the new battery in place.

Flat-blade driver

Scribe or non-marring tool

- OR -

Phillips #0 screwdriver