FIC M296 Manual De Usuario
Installation and Upgrade
2.3.3 Removing the Thermal Plate and Cooling Fan
1. Release nine screws as shown in the picture below, and then remove Thermal Plate by
slightly lifting it up.
Screws of
Thermal Plate
Thermal Plate
Screws of
Thermal Plate
Thermal Plate
Figure 2-8
Remove the Thermal Plate
2. Before removing the cooling fan, you need to disassemble four of screws.
Screws of
Thermal Plate
Thermal Plate
Remove cooling fan
module by slightly
lifting it up
Figure 2-9
Remove the Cooling Fan
3. Release four screws as shown in the picture above, and then remove cooling fan module
by slightly lifting it up. Be careful about the cable connected to Glide Pad Board.
2-10
FIC M295/M296 Service Manual