Elo TouchSystems D-Series Rev.C] Manual De Usuario

 

 

 

11  

There are two mounting options for the D-Series touchcomputer. In both cases, the 

base must be mounted on a horizontal surface.  

Option 1: Secure from below. Use the four pretapped holes to secure the touchcomputer from 

below the mounting surface. The holes are designed to work with ISO metric m6 screws. These 

screws are not contained in the package, but should be readily available at any hardware store. 

Option 2: Secure from top. Use the two through holes to secure the base to the surface.  

Refer to the figure below for the location of the holes. All dimensions are in 

millimeters. 

 

Advertising brackets are provided to allow the user to display paper ads on the 

back of the D-Series touchcomputer. These brackets are included separately in 

the accessory box. The maximum size of the advertising material is 220mm X 

320mm (8.6” X 12.6”). 

Option 2 Through holes 

Option 1 Pretapped holes