Epson 386/33 PLUS Manual De Usuario

4. Unpack the option card and adjust any switches or jumpers

on it, if necessary. (Check the option card instructions.)

When you handle the card, be careful not to touch any of

the components on the circuit board or the gold-edged

connectors. If you need to set it down before you install it,

place it gently on top of its original packing material with

the component side facing up. Keep the packing materials

in case you remove the card later.

5. Grip the card firmly by the top corners and make sure the

connectors point down, as shown below.

6. Insert the card into the slot, guiding it straight down. Once

the connectors reach the slot, push the card downward

firmly (but carefully) to insert it fully. You should feel the

card fit into place.

If the card does not go in smoothly, do not force it; pull it

all the way out and try again, keeping it straight as you

insert it. Examine the card to verify that it is fully seated in

the slot along the length of the connector.