Toshiba 950-796 Manual De Usuario

To check if the computer’s Touch pad En-SW is malfunctioning or not, follow the 
troubleshooting procedures below as instructed. 

Procedure 1:  Diagnostic Test Program Execution Check 

Procedure 2:  Connector Check and Replacement Check 

Execute the Touch pad test (ONLY ONE TEST) in the Diagnostic Program. Refer to Chapter 
3, Tests and Diagnostics, for more information on how to perform the test program. 

If an error occurs, go to Procedure 2. If an error does not occur, touch pad is functioning 
properly. 

Check 1 

Make sure the cables are firmly connected to the Touch pad En-SW board and 
system board. 

 

 

If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem 
still occurs, go to Check 2.