Aspire Digital 1360 Manual De Usuario

67

Chapter 3

Remove the four screws holding the HDD bracket, then remove the HDD bracket.

Removing the Main Board

10. See “Removing the ODD Module(2)” on page 66.

11. See “Removing the HDD Bracket” on page 66.

12. Disconnect the launch board cable. Tear off the tape that fastens the speaker set cable. Then disconnect 

the speaker set cable.

.

13. Remove the two screws holding the main board as the picture shows. Remove another two screws that 

fasten the main board. Then detach the main board from the lower case carefully.