Barco 601-0367-00 Manual De Usuario

1.  Remove the projector lens.
2.  Use the mounting screws (2) to mount the baseplate (1) to the underside of 

the projector.

3.  Loosen the 2 connection screws on the lens ring bracket and remove the 

upper lens ring bracket (6).

4.  Check that the shim (4) position is correct for the type of lens you are 

using. 

5.  Loosely mount the lower lens ring bracket (5) to the sliding rail (3). Do not 

over tighten.

6.  Replace the projector lens. If required, adjust the lens settings.
7.  Replace the upper lens rings bracket (6) and tighten the 2 connection 

screws firmly.

8.  Tighten the lower lens ring/sliding rail screws firmly.

Procedure

EN52, EN54

EN521 EN53, 

EN55, EN56, 

EN57

EN51, EN53, 

EN55, EN56, 

EN57 

EN52, EN54, 

Mounting on different lenses

Before mounting the lens support kit on the EN52 and EN54 lenses, the 

lower lens ring bracket should be rearranged so that the shim is on the side 

furthest from the projector.