ATTO Technology 2500C Manual De Usuario

10

Configuration: Ethernet

The iPBridge is set up by default to request an IP 
address from a DHCP server. If you do not have a 
DHCP server to assign IP addresses to devices, 
get an IP address from your network 
administrator.
Use the QuickNAV utility from the CD included 
with your iPBridge to find your iPBridge on your 
network.

1

Work from the computer attached to the 
iPBridge on the same broadcast domain. Find 
and download the QuickNAV utility, 
QuickNAV-windows.exe, from the CD 
included with your iPBridge.

2

Turn on the iPBridge.
Wait for the iPBridge Ready LED to light, up to 
three minutes, before proceeding. 

3

Run the QuickNAV application.

 a. Click Next on the QuickNAV Wizard 

page.

 b. Select your iPBridge serial number 

from the list of choices displayed.

 c. Click Next.

•  If you are using DHCP, note the IP 

Address assigned by the server:

_________________________________

•  If you are not using DHCP, configure the 

iPBridge with the IP Address and 
Subnet Mask given to you by your 
network administrator.

_________________________________

_________________________________

 d. Click Launch Browser.

Your browser points to the 
ExpressNAV splash screen.

4

Enter the user name and password values. 

Note

The iPBridge Status page appears.

5

Go on to 

 on page 13 

or 

depending on your model of the iPBridge 2500.