Avaya Wireless AP-3 Manual De Usuario
![Avaya](https://files.manualsbrain.com/attachments/539de53b12b0cfce0bb8cf1e3bb961e969d9f556/common/fit/150/50/0bfb423b07b431ecf5ac095ccde7771f5eac50e962dfba59f8e256280b3d/brand_logo.png)
Recovery Procedures
7-24 Avaya Wireless AP-3 User’s Guide
4. Open your terminal emulation program (like HyperTerminal) and
set the following connection properties:
— Com Port: <COM1, COM2, etc., depending on your computer>
— Baud rate: 9600
— Data Bits: 8
— Stop bits: 1
— Flow Control: None
— Parity: None
5. Under File -> Properties -> Settings -> ASCII Setup, enable the
Send line ends with line feeds option.
Result: HyperTerminal sends a line return at the end of each line
of code.
of code.
6. Press the RESET button on the AP.
Result: The terminal display shows Power On Self Tests (POST)
activity. After approximately 30 seconds, a message indicates:
Sending Traps to SNMP manager periodically. After this
message appears, press the ENTER key repeatedly until the
following prompt appears:
activity. After approximately 30 seconds, a message indicates:
Sending Traps to SNMP manager periodically. After this
message appears, press the ENTER key repeatedly until the
following prompt appears:
[Device name]>