Cisco Systems OL-1375-02 Manual De Usuario

Descargar
Página de 8
 
3-6
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-02
Chapter 3      Installing the Client Adapter
Installing the Driver and Client Utilities
Step 14
Select SSID under Property. Then enter your RF network’s case-sensitive SSID in the Value box.
Step 15
Select Client Name under Property. Then enter your Windows CE device’s unique client name in the 
Value box.
SSID
The service set identifier (SSID) identifies the specific wireless 
network that you want to access.
Range: Up to 32 characters (case sensitive)
Note
If you leave this parameter blank, your client adapter can 
associate to any access point on the network that is 
configured to allow broadcast SSIDs (see the AP Radio 
Hardware page in the access point management system). If 
the access point with which the client adapter is to 
communicate is not configured to allow broadcast SSIDs, 
the value of this parameter must match the SSID of the 
access point. Otherwise, the client adapter cannot access the 
network.
Client Name
A logical name for your Windows CE device. It allows an administrator 
to determine which devices are connected to the access point without 
having to memorize every MAC address. This name is included in the 
access point’s list of connected devices.
Range: Up to 16 characters
Note
Each computer on the network should have a unique client 
name.