Cisco Systems PA-POS-1OC3 Manual De Usuario

Descargar
Página de 90
1-20
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Chapter 1      PA-POS-1OC3 Overview
  Identifying Interface Addresses
Identifying Interface Addresses 
This section describes how to identify interface addresses for the PA-POS-1OC3 in supported platforms. 
Interface addresses specify the actual physical location of each interface on a router or switch.
Interfaces on a port adapter installed in a router maintain the same address regardless of whether other 
port adapters are installed or removed. However, when you move a port adapter to a different slot, the 
first number in the interface address changes to reflect the new port adapter slot number.
Interfaces on a port adapter installed in a VIP or FlexWAN module maintain the same address regardless 
of whether other interface processors or modules are installed or removed. However, when you move a 
VIP or FlexWAN module to a different slot, the interface processor or module slot number changes to 
reflect the new interface processor or module slot. 
Note
Interface ports are numbered from left to right starting with 0.
The following subsections describe the interface address formats for the supported platforms:
 summarizes the interface address formats for the supported platforms.
Table 1-3
Interface Addresses
Platform
Interface Address Format
Numbers
Syntax
Cisco 7200 VXR routers 
(7204VXR, 7206VXR)
Port-adapter-slot-number/interface-port-number
Port adapter slot—1 through 6 
(depends on the number of slots 
in the router)
1
Interface port—0
1/0
Cisco 7201 router
Port-adapter-slot-number/interface-port number
Port adapter slot—always 1
Interface port—0 
1/0
Cisco 7301 router
Port-adapter-slot-number/interface-port number
Port adapter slot—always 1
Interface port—0
1/0
Cisco 7304 PCI port adapter 
carrier card in Cisco 7304 
router
Module-slot-number/interface-port-number
Module slot—2 through 5
Interface port—0
3/0
Interface port—0