Cisco Systems PA-POS-1OC3 Manual De Usuario
3-13
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Chapter 3 Removing and Installing the PA-POS-1OC3
Connecting PA-POS-1OC3 Interface Cables
Connecting PA-POS-1OC3 Interface Cables
To continue your PA-POS-1OC3 installation, you must connect the interface cables. The instructions
that follow apply to all supported platforms.
that follow apply to all supported platforms.
Note
Optical fiber cables are not available from Cisco Systems; they are available from outside commercial
cable vendors. For more information on the cables you should use with this port adapter, see the
cable vendors. For more information on the cables you should use with this port adapter, see the
.
Note
We strongly recommend cleaning any optical-fiber connectors before making new connections to
optical-fiber equipment. For more information, see the Inspection and Cleaning Procedures for
Fiber-Optic Connections document at
optical-fiber equipment. For more information, see the Inspection and Cleaning Procedures for
Fiber-Optic Connections document at
,
and the
Compressed Air Cleaning Issues for Fiber-Optic Connections at
To connect the cables to the PA-POS-1OC3, attach either one duplex optical fiber cable or two simplex
optical fiber cables between the PA-POS-1OC3 interface port on your PA-POS-1OC3 and your network.
(See
optical fiber cables between the PA-POS-1OC3 interface port on your PA-POS-1OC3 and your network.
(See
Make sure that the receive (RX) cable goes to the RX LC-type receptacle and transmit (TX) cable goes
to the TX LC-type receptacle on the PA-POS-1OC3.
to the TX LC-type receptacle on the PA-POS-1OC3.
Figure 3-3
Connecting Simplex or Duplex Optical Fiber Cables to the PA-POS-1OC3
Warning
Class 1 laser product. Statement 1008
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
beams or view directly with optical instruments. Statement 1051
122199
2 simplex
connectors
To external
OC-3 network
To external
OC-3 network
TX
RX
1 duplex
connector
TX RX
or
PA-POS-1OC3
ALARM
ENABLED
RCV
TX
RX
POS 0
CLASS 1 LASER PRODUCT
LASERPRODUKT DER KLASSE
1
PRODUIT LASER DE CLASSE 1
PRODUCTO LASER CLASE
1