Compaq NetPorty II Manual De Usuario

Installation
Installing the Software

Version 1.03
2-4

Driver installation:
1  Insert the CD. The setup programm will start

automatic, if not please start the program
“START.EXE” in root path.

2  Go to "Software Installation"
3  Choose your operating system, is important.
4  Choose your hardware component at the selection

box then press "Start Installation". If the file is started
(*.com file), follow the steps on the screen. If
necessay type in the password.

5  If password is correct software will be installed

successful.

Application installation:
1  Insert the CD. The setup programm will start

automatic, if not please start the program
“START.EXE” in root path.

2  Go to "Software Installation"
3  Choose your operating system, is important.
4  Choose PcCANControl component at the selection

box then press "Start Installation". If the file is started
(*.com file), follow the steps on the screen. If
necessay type in the password.

5  Start PcCANControl, select “create a new project”

and the NetPorty II hardware, at this case “Porty2-
COM1” or “Porty2-COM2”. After the selection the
necessary  NetPorty II software is activated on your
PC. For further information see also chapter  about
PcCANControl.

It is not necessary to install a driver. The software works
with the standard Win32 serial communication services
with 115200bps, 8 bits, no parity, 1 stop bit.