Cisco Systems NPE-225 Manual De Usuario
9-18
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 9 Removing and Installing the NPE or NSE
Removing and Replacing the NPE or NSE
Removing a SDRAM SODIMM
This section provides a procedure for removing the small outline dual in-line memory module (SODIMM)
on the NPE-400.
on the NPE-400.
Follow these steps to remove the existing SODIMM:
Step 1
Remove the NPE-400 from the system.
Step 2
Place the NPE-400 on an antistatic mat or pad and ensure that you are wearing an antistatic device, such
as a wrist strap.
as a wrist strap.
Step 3
Locate the SODIMM (see
Figure 9-13
Location of SDRAM SODIMM on the NPE-400
Step 4
Locate the SODIMM standoff screw and use a Phillips screwdriver to remove it.
1
Temperature sensor (U31)
7
Midplane connectors
2
Keying post
8
Boot ROM (U7)
3
RM7000 microprocessor
9
Temperature sensor (U6)
4
System controller
10 SODIMM (J1)
5
Captive installation screw
11 Standoff and screw
6
Handle
NETWORK PROCESSING ENGINE-400
NETWORK PROCESSING ENGINE-400
66411
9
10
11
1
7
8
6
5
2
3
4