Cisco Systems NPE-225 Manual De Usuario
10-10
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 10 Configuration Tasks and Troubleshooting Information
NSE-1 Error Messages
•
show pxf feature nat ?
Router# show pxf feature nat ?
entry toaster nat entry
stat toaster nat processing info
tcp toaster nat tcp logging info
Router# show pxf feature nat entry
--- 171.69.12.175 192.168.0.129 --- ---
--- 171.69.12.161 192.168.0.7 --- ---
--- 171.69.12.162 192.168.0.2 --- ---
--- 171.69.12.163 192.168.0.3 --- ---
--- 171.69.12.164 192.168.0.4 --- ---
--- 171.69.12.165 192.168.0.13 --- ---
--- 171.69.12.166 192.168.0.5 --- ---
Router# show pxf feature nat stat
NAT translation processing information
total nat entries = 0x1000, entries (used, free) = (0x7, 0xFF9)
untranslated flows:0x7022D
translated flows:0x1030
icmp extendable flows:0x0
noop alloc miss:0x0
entry alloc miss:0x0
entry delete miss:0x0
NSE-1 Error Messages
If the PXF processor crashes or hangs, check the syslog for any error messages.
You may see error messages similar to the following messages.
•
PXF processor crash and error message:
WARNING:PXF Exception:mac_xid=0x10000
*** IHB watchdog timer expired
6d16h:%PXF-2-EXCEPTION:pxf exception on pxf tmc.
Workaround: Run the show pxf crash command to obtain more information.
•
PXF processor hang and error message:
WARNING:PXF Exception:mac_xid=0x8
*** External Memory Column 3 exception, type = 20
If you see this error message, the PXF processor has been left in HALT state. During bootup, the
PXF processor is in error state and cannot be brought up.
PXF processor is in error state and cannot be brought up.
Workaround: Reboot the router.