Cisco Systems Network Assistant Manual De Usuario

R E V I E W D R A F T — C I S C O C O N F I D E N T I A L

A-3

Getting Started with Cisco Network Assistant

OL-6194-07

Appendix A Configuring a Catalyst 4500 Series Switch for Network Assistant Management

Additional Configuration Required to Manage a Community

Note

If you have enabled clustering, disable clustering before configuring a community.

If you plan to use a community, define an IP address on each switch:

Additional Configuration Required to Manage a Cluster

If you plan to use clustering, enter the cluster run global configuration command on each device, and
enter the ip address interface configuration command on the cluster commander:

Command

Purpose

Step 1

Switch# configuration terminal

Enter global configuration mode.

Step 2

Switch(config)# interface {vlan

vlan_ID

{fastethernet | gigabitethernet}

slot/interface

Port-channel

number

}

Select an interface.

Step 3

Switch(config-if)# ip address

ip_address

address_mask

(Optional) Assign an IP address to the Catalyst 4500 series.

Note

This step is mandatory if the switch is part of
community or is a cluster command switch. This step
is optional if the switch is a cluster member
candidate.

Step 4

Switch(config-if)# end

Return to privileged EXEC mode.

Step 5

Switch# show running-config

Verify the configuration.

Command

Purpose

Step 1

Switch# configuration terminal

Enter global configuration mode.

Step 2

Switch(config)# cluster run

Enable clustering.

Note

Enable clustering on all switches that are part of the
potential cluster.

Step 3

Switch(config)# cluster enable

Name the cluster.

Step 4

Switch(config)# interface {vlan

vlan_ID

{fastethernet | gigabitethernet}

slot/interface

Port-channel

number

}

Select an interface.

Step 5

Switch(config-if)# ip address

ip_address

address_mask

(Optional) Assign an IP address to the Catalyst 4500 series
switch cluster master.

Note

This step is mandatory if the switch is part of a
community or is a cluster command switch. This step
is optional if the switch is a cluster member
candidate.