Cisco Systems UCSCPCIEBTG Manual De Usuario
Viewing Storage Controller Logs
Before You Begin
You must log in with admin privileges to perform this task.
Procedure
Purpose
Command or Action
Enters the chassis command mode.
Server# scope chassis
Step 1
Enters command mode for an installed storage
card.
card.
Server /chassis # scope storageadapter slot
Step 2
Displays the storage controller logs.
Server /chassis/storageadapter # show log
Step 3
This example shows how to display storage controller logs:
Server #
scope chassis
Server /chassis #
scope storageadapter SLOT-3
Server /chassis/storageadapter #
show log
Time
Severity
Description
----
--------
-------------
Fri March 1 09:52:19 2013
Warning
Predictive Failure
Fri March 1 07:50:19 2013
Info
Battery charge complete
Fri March 1 07:50:19 2013
Info
Battery charge started
Fri March 1 07:48:19 2013
Info
Battery relearn complete
Fri March 1 07:47:19 2013
Info
Battery is discharging
Fri March 1 07:45:19 2013
Info
Battery relearn started
Server /chassis/storageadapter #
Backing Up and Restoring the Adapter Configuration
Exporting the Adapter Configuration
The adapter configuration can be exported as an XML file to a TFTP server.
If any firmware or BIOS updates are in progress, do not export the adapter configuration until those tasks
are complete.
are complete.
Important
Before You Begin
A supported Virtual Interface Card (VIC) must be installed in the chassis and the server must be powered on.
Obtain the TFTP server IP address.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
127
Managing Network Adapters
Viewing Storage Controller Logs