Cisco Systems CX-FEIP-2FX= Manual De Usuario
10 Fast Ethernet Interface Processor (FEIP) Installation and Configuration
Installation Prerequisites
Figure 2
Maximum Segment and Network Lengths—100BASE-FX and 100BASE-TX
What Is the Cisco 7000 Series?
The Cisco 7000 series includes the Cisco 7000 and Cisco 7010 routers. The FEIP operates in the
Cisco 7000 series routers. (For software and hardware requirements, refer to the section “Software
and Hardware Prerequisites” on page 3.)
Cisco 7000 series routers. (For software and hardware requirements, refer to the section “Software
and Hardware Prerequisites” on page 3.)
Network interfaces reside on modular interface processors, including the FEIP, which are inserted
into interface processor slots and provide a direct connection between external networks and the
high-speed CxBus in the Cisco 7000 series. The Cisco 7000 series supports any combination of
available network interface types.
into interface processor slots and provide a direct connection between external networks and the
high-speed CxBus in the Cisco 7000 series. The Cisco 7000 series supports any combination of
available network interface types.
In the 7-slot Cisco 7000 (see Figure 3), slots 0 through 4 are for interface processors including the
FEIP.
FEIP.
Maximum segment length, full duplex
100 m TX
DTE
DTE*
*DTE = Data Terminal Equipment
**Because repeaters have more delay, total network length is shorter.
2000 m FX–multimode
Maximum segment length, half duplex
100 m TX
DTE
DTE
412 m FX
Maximum segment length, full duplex
10,000 m FX–single mode
DTE
DTE
Maximum network length, half duplex
200 m TX
DTE
DTE
R
(Repeater)
272 m FX**
31703