Cisco Systems Cisco 7010 Manual De Usuario

Cisco 7010 and Cisco 7505 Chassis Replacement Instructions  7

If these conditions are not true, for instance, if you must remove a rack-mounted chassis

before you can install the new chassis, you must disconnect all power and network interface cables.

Also, ensure that your new chassis allows sufficient clearance for maintenance: to remove and
replace processor modules and interface cables at the interface processor end, and to access the
internal components at the noninterface processor end. Figure 4 shows the chassis footprint and the
clearance required to remove or install each of the major components.

Noninterface processor end

Chassis foot C

14.25 in. (36.20 cm)

Chassis width

17.50 in. (44.45 cm)

Fan tray

Chassis depth 

17.0 in. (43.18 cm)

Chassis depth with power cord and cable

management bracket

19.0 in. (48.26 cm)

Interface processor width

14.55 in. (36.96 cm)

Power supply width

14.60 in. to ears (37.08 cm)

Interface processor depth

11.25 in. (28.58 cm)

Power supply depth

12.00 in. (30.48 cm)

1.25 in. (3.18 cm)

Interface processor end

H2818

2 in.

(5.08 cm)

Chassis foot C

13.32 in. (33.83 cm)