Cisco Systems H.323/SIP Manual De Usuario

3-6

Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

OL-6571-02

Chapter 3 Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

How to Configure Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1

Step 4

To accept the settings, click Submit.

Step 5

Restart the IP-gateway server.

Verifying MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Configuration

Step 1

To verify that Release 5.2.1 services are running, choose Start > Settings > Control Panel from the
IP-gateway server; then, select Services.

Step 2

Make sure that the following services are running:

•

Cisco Unified MeetingPlace Gateway SIM

•

Cisco Unified MeetingPlace IP Gateway

Step 3

To verify that the IP-gateway server is logging in, telnet to the Cisco Unified MeetingPlace Audio Server
system.

Step 4

To verify that the IP-gateway server status is OK, enter gwstatus.

Note

It can take up to five minutes for gwstatus to update; therefore, any recent changes to the gateway may
not be reflected.

Step 5

Verify that you can access the Cisco Unified MeetingPlace Audio Server system by using a Cisco IP
Phone.

Step 6

Verify that you can access Cisco Unified MeetingPlace Audio Server system by using a PSTN phone.

H.323 Settings

Enabled

Yes

E.164 Address

Dialable number for the MeetingPlace H.323/SIP IPGW

H.323 ID

MeetingPlace

Gateway Port

1720

Gatekeeper Address

IP address of the H.323 Gatekeeper

Gatekeeper Port

1719

Use Gatekeeper

Yes

Table 3-4

Release 5.2.1 Configuration Settings for Use With an H.323 Gatekeeper

Field Name

Setting