Cisco Systems NSS3000 Series Manual De Usuario

Logging into the Configuration Interface

NSS3000 Series Network Storage System Getting Started Guide

13

The configuration for your computer is only temporary. After you initially open the 
configuration interface, you can configure the static IP address for the NSS and then 
restore your computer’s network settings to their previous values. For help setting 
the IP configuration on the NSS, refer to the online help available from NSS 
configuration interface.:

This section describes how to log in to the NSS configuration interface. The NSS 
configuration interface is a management tool you use to configure the NSS. 

If you are logging into the NSS for the first time, write down the MAC address 
located on the sticker attached to the bottom of the chassis. You will need the 
MAC address as this is part of the default hostname. Otherwise, skip this step

Select a login method. There are three ways to log into the configuration interface.

1. Open a web browser on your computer and enter the following URL in the 

Address field:

-

Where 

<IP_address_of_NSS_unit >

is the IP address of the NSS3000 

NAS chassis, which appears on the LCD display.

You can also access the chassis by entering the following:

-

Where 

<MAC_address_of_NSS_unit > 

is the MAC address of the 

NSS3000 NAS chassis. The MAC address of the chassis is recorded on 
a label above the disk drive b

2. Use the Bonjour discovery tool (if installed) and select the NSS from the list of 

available devices.