Cisco Systems NSS3000 Series Manual De Usuario

Saving the NSS Configuration

NSS3000 Series Network Storage System Getting Started Guide

17

stream video to the Windows camera utility program. After you run the 
wizard, you must map the network drive from the PC that runs the 
Windows utility program to the CIFS share and then set up the utility to 
save to the mapped network drive.

You can save a copy of the NSS configuration to use if you need to restore the 
settings at a later time. When you save the configuration file, it saves a date-
stamped version of the current configuration settings to the specified volume on 
the NSS. You can choose to save the current configuration settings to a specified 
volume on the NSS or you can save the file to a USB flash device.

To save the current configuration:

If you are saving the configuration file to a USB flash device, insert a USB flash 
device into the AUX-1 port on the front panel of the NSS.

From the Manager Menu, click Admin 

   

Configuration. 

The Configuration Manager page appears.

Select the location where the backup is saved from the Stored Configuration 
Location drop-down menu. To save the configuration file to a USB flash device, 
select the AUX-1 port as the location. You can then copy the configuration file 
from the USB flash device to another location on your network.