Cisco Systems (VIP6-80) Manual De Usuario

Descargar
Página de 40
Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Versatile Interface Processor (VIP6-80) 
Installation and Configuration Guide
Product Numbers: VIP6-80(=), MEM-VIP6-64M-SD(=), MEM-VIP6-128M-SD(=), MEM-VIP6-256M-SD(=)
Customer Order Number DOC-7814372=
Introduction 
This document describes the Versatile Interface Processor (VIP6-80), an option available for use with 
the Cisco 7500 series and the Cisco 7000 series routers using the 7000 Series Route Switch Processor 
(RSP7000) and 7000 Series Chassis Interface (RSP7000CI). The VIP6-80 improves high-performance 
switching over previous generation VIPs.
The VIP6-80 supports online insertion and removal (OIR), a feature that allows you to remove and 
replace a VIP6-80 without first shutting down the system. However, the VIP6-80 does not support OIR 
of port adapters (PAs). The VIP6-80 must be removed before removing or installing the port adapter. 
The VIP6-80 also supports Single Line Card Reload, a feature that reloads a failed line card on the 
network backplane without reloading other line cards. Refer to the 
 for more information.
The VIP6-80 supports any combination of LAN and WAN PAs, including Fast Ethernet, T1/E1, 
High-Speed Serial Interface (HSSI), T3/E3, T3/E3 ATM, multichannel T1/E1, multichannel T3/E3, 
OC-3 ATM, Packet over SONET (POS), and OC-12 ATM. For a list of supported port adapters, refer to 
the 
Contents
This guide includes the following sections: