Cisco Systems 100/200/300/400 Manual De Usuario

2-2

Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide

OL-13478-03

Chapter 2 Preparing to Install the Content Delivery Engines

Site Requirements

•

When removing or installing a component, use any available handles, ejector levers, or captive
installation screws. These devices prevent accidental removal, provide proper grounding for the
system, and help to ensure that bus connectors are properly seated.

Caution

For safety, periodically check the resistance value of the antistatic strap. The measurement should be
between 1 and 10 megohm (Mohm).

Environmental, Physical, and Power Specifications

The CDEs are tested to the environmental specifications indicated in

Table 2-1

. All testing is performed

per procedures defined in Bellcore GR-63-CORE NEBS Physical Protection and the Bellcore
GR-1089-CORE EMC and Electrical Safety — Generic Criteria for Network Telecommunications
Equipment.

Table 2-2

provides the physical dimensions of the CDEs.

Table 2-1

Environmental Specifications Summary

Environment

Specification

Temperature, operating

0 to 50°C (32 to 122° F)

Temperature,
non-operating

–40°C to 70°C (–104°F to 158°F)

Altitude

60 to 4000 m

Humidity, non-operating

5 to 95%, noncondensing at temperatures of 23°C (73°F) to 40°C (104°F)

Table 2-2

Physical Dimensions

Height

CDE100
CDE200
CDE300
CDE400

1.75 inches (4.45 cm)

3.50 inches (8.90 cm)

4.75 inches (12.1 cm)

7.00 inches (17.8 cm)

Width

CDE100
CDE200
CDE300
CDE400

19.00 inches (48.26 cm)

17.50 inches (44.45 cm)

17.25 inches (43.8 cm)

Depth

CDE100
CDE200
CDE300
CDE400

27.6 inches (70.10 cm)

28.5 inches (72.39 cm)

27.5 inches (69.9 cm)

26.5 inches (67.3 cm)

Front clearance

2.0 inches (7.6 cm)

Side clearance

1.0 inches (2.5 cm)

Rear clearance

3.6 inches (9.2 cm)