Cisco Systems 57712 Manual De Usuario
C H A P T E R
12
Configuring Platform Event Filters
This chapter includes the following sections:
•
•
•
•
•
•
Platform Event Filters
A platform event filter (PEF) can trigger an action and generate an alert when a critical hardware-related event
occurs. For each PEF, you can choose the action to be taken (or take no action) when a platform event occurs.
You can also choose to generate and send an alert when a platform event occurs. Alerts are sent as an SNMP
trap, so you must configure an SNMP trap destination before the alerts can be sent.
occurs. For each PEF, you can choose the action to be taken (or take no action) when a platform event occurs.
You can also choose to generate and send an alert when a platform event occurs. Alerts are sent as an SNMP
trap, so you must configure an SNMP trap destination before the alerts can be sent.
You can globally enable or disable the generation of platform event alerts. When disabled, alerts are not sent
even if PEFs are configured to send them.
even if PEFs are configured to send them.
Enabling Platform Event Alerts
Procedure
Purpose
Command or Action
Enters the fault command mode.
Server# scope fault
Step 1
Enables platform event alerts.
Server /fault # set
platform-event-enabled yes
platform-event-enabled yes
Step 2
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
149