Cisco Systems 32369 Manual De Usuario
show ip dhcp binding
Cisco IOS DHCP Server 43
show ip dhcp binding
To display address bindings on the Cisco IOS Dynamic Host Configuration Protocol (DHCP)
Server, use the show ip dhcp binding EXEC command.
Server, use the show ip dhcp binding EXEC command.
show ip dhcp binding [address]
Syntax Description
Defaults
None
Command Modes
EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
If the address is not specified, all address bindings are shown. Otherwise, only the binding for the
specified client is displayed.
specified client is displayed.
Examples
The following examples show the DHCP binding address parameters, including an IP address, an
associated MAC address, a lease expiration date, and the type of address assignment that have
occurred. Table 2 lists descriptions of the fields in each example.
associated MAC address, a lease expiration date, and the type of address assignment that have
occurred. Table 2 lists descriptions of the fields in each example.
Router> show ip dhcp binding 172.16.1.11
IP address
Hardware address
Lease expiration
Type
172.16.1.11
00a0.9802.32de
Feb 01 1998 12:00 AM
Automatic
Router> show ip dhcp binding 172.16.3.254
IP address
Hardware address
Lease expiration
Type
172.16.2.254
02c7.f800.0422
Infinite
Manual
address
(Optional) Specifies the IP address of the DHCP client for which
bindings will be displayed.
bindings will be displayed.
Table 2
show ip dhcp Field Descriptions
Field
Description
IP address
The IP address of the host as recorded on the DHCP server.
Hardware address
The MAC address or client identifier of the host as recorded
on the DHCP server.
on the DHCP server.
Lease expiration
The lease expiration date of the IP address of the host.
Type
The manner in which the IP address was assigned to the host.