Cisco Systems (VISM) Manual De Usuario
5-122
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
cnfcodecparams
Command Modes
VoIP switching
Usage Guidelines
The packetization period parameter is required but the remaining parameters are optional. The
parameters of any codec can be configured regardless of whether the current codec template supports
that codec.
parameters of any codec can be configured regardless of whether the current codec template supports
that codec.
If you are using template 2, the G.726 and G.729 codec types are ignored and replaced with clear
channel.
channel.
The G.723.1 codecs are supported for VISM-PR cards and are not supported for VISM cards.
Examples
The following example shows that the codec with identification number 3 is configured with a
packetization period of 20 ms, has the highest priority, is not an IANA registered codec, and is
represented by the string geeseven:
packetization period of 20 ms, has the highest priority, is not an IANA registered codec, and is
represented by the string geeseven:
cnfcodecparams 3 20 1 0 geeseven
Related Commands
There are no related commands.