CyberData VoIP Intercom Manual De Usuario
CyberData Corporation
930181B
Operations Guide
Installing the VoIP Intercom
Configure the Intercom Parameters
22
2.3.4 Configure the SIP Parameters
1. Click SIP Setup to open the SIP Setup page (
Note
For specific server configurations, go to the following URL:
http://www.cyberdata.net/support/voip/intercom.html
Figure 2-17. SIP Setup Page
2. On the SIP Setup page, enter values for the parameters indicated in
.
Table 2-8. SIP Setup Parameters
Web Page Item
Description
SIP Server*
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Outbound Proxy
Enter the Outbound Proxy as either a numeric IP address
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
in dotted decimal notation or the fully qualified host name
(FQHN) up to 64 characters.
Remote SIP Port*
Enter the Remote SIP Port number (default 5060).
Local SIP Port*
Enter the Local SIP Port number (default 5060).
SIP User ID*
Enter the SIP User ID (up to 25 alphanumeric characters).