Cabletron Systems 36 Manual De Usuario

You can easily install the FOMIM into a Multi Media Access Center with 
a Flexible Network Bus (MMAC-FNB). Install the FOMIM into the 
MMAC as follows: 

1. Power down the MMAC hub.

2. Remove any chassis safety bars present on the front of the MMAC 

hub.

3. Slide the FOMIM (Figure 2-1) into the card cage of the MMAC hub. 

Be sure that the card is properly aligned in the top and bottom slots of 
the card cage.

4. Firmly press the module connections into the backplane. Do not force 

the module into place or use the knurled knobs to draw the module into 
place.

5. Screw in the knurled knobs to secure the module to the MMAC.

6. Reinstall any chassis safety bars that were present on the MMAC.

Slot 1 of the MMAC hub is reserved for a management module 
(e.g., IRM3) only.

FOMIM

MMAC-8FNB