Cabletron Systems 9H531-17 Manual De Usuario

 

Installing the SmartSwitch 9000 Module

2-2

 

2. Attach the antistatic wrist strap (refer to the instructions outlined on the 

antistatic wrist strap package).

3. Unlock the top and bottom plastic locking tabs of the module faceplate.

4. Slide out the module, and place it on its side with the internal components 

facing up.

5. Remove and save the two faceplate mounting screws securing the 

HSIM/VHSIM coverplate and remove the coverplate.

6. Remove and save the two standoff screws.

7. Place the HSIM/VHSIM behind the module faceplate.

8. Insert the connectors of the HSIM/VHSIM into the host device connector pins 

on the module.

9. Press down firmly on the back of the HSIM/VHSIM until the pins slide all the 

way into the connector holes.

10. Secure the HSIM/VHSIM to the faceplate using the two screws saved in

step 5.

11. Secure the HSIM/VHSIM to the standoffs with the two screws saved in step 6.

12. Reinstall the interface module in the chassis.

13. Reattach the network cabling to the interface module.

 

Figure 2-1 shows the various components that are accessible to the user. These 
consist of an eight-position DIP switch, replaceable PROMs and sockets for RAM. 
These components will be used for future upgrades. Instructions for installing the 
components will be supplied with the upgrade kit.