Cabletron Systems EMC39-12 Manual De Usuario
Chapter 2:
Installation
Page 2-2
EMC39-12 User’s Guide
2.2.1 Rack Mounting the EMC39-12
Before installing the EMC39-12, care must be taken to ensure that the
rack used will support the unit and that the rack remains stable with the
EMC39-12 installed. In order to allow for proper cooling within the rack,
there must be a two-inch clearance on either side of the unit. Refer to
Chapter 1,
rack used will support the unit and that the rack remains stable with the
EMC39-12 installed. In order to allow for proper cooling within the rack,
there must be a two-inch clearance on either side of the unit. Refer to
Chapter 1,
Introduction
for power and environmental requirements.
The following procedures explain how to install the EMC39-12 in a
19-inch rack.
19-inch rack.
1. Remove four cover screws (two from each side) located along the
front edges of each side of the EMC39-12. Figure 2-1 shows the
location of the screws.
location of the screws.
2. Using the four cover screws removed in step 1, attach the rack
mounting brackets to each end of the EMC39-12.
Figure 2-1
Installing the Rackmount Brackets
Do not remove the cover from the EMC39-12. There are no
user configurable devices inside and the electronics are
static sensitive.
user configurable devices inside and the electronics are
static sensitive.
Screws (4)
Rack Mounting
Brackets (2)
EMC39-12
Ethernet Media Converter
WITH
LANVIEW
TPLINK
XMT
RCV
FOLNK
12 11 10 9 8 7 6 5 4 3 2 1
PWR
12
10
9
8
7
6
5
4
3
2
1
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX TX
RX
TX
RX TX
RX
TX
RX
TX
RX
TX
11
emc39bk Page 2 Monday, February 12, 1996 4:21 PM