Cabletron Systems TM 9C300-1 Manual De Usuario
9C300-1 Environmental Module Operation
3-20
The Module Environment Screen
Select <ENV> at the Module Specific Screen, as shown in Figure 3-24, to display
environmental parameters for the specific module.
environmental parameters for the specific module.
Line 1 of the Module Environment Screen, as shown in Figure 3-25, identifies the
selected module by chassis slot location.
selected module by chassis slot location.
Line 2 displays the measured input voltage from the 48 volt system power bus to
the module’s DC-to-DC converter. The MMAC-Plus power supply provides
voltage to the module via a chassis backplane. The converter’s 5 volt output line
is also shown on line 2.
the module’s DC-to-DC converter. The MMAC-Plus power supply provides
voltage to the module via a chassis backplane. The converter’s 5 volt output line
is also shown on line 2.
Line 3 displays the module’s current temperature in Fahrenheit and Celsius. The
temperature is qualified as either COLD, COOL, NORM (normal), WARM, or
HOT based on system parameters.
temperature is qualified as either COLD, COOL, NORM (normal), WARM, or
HOT based on system parameters.
Figure 3-25. The Module Environment Screen
Select <EXIT> to return to the Module Specific Screen.
The Module Memory Screen
Select <MEMORY> at the Module Specific Screen, as shown in Figure 3-24, to
view the memory configuration of a selected module.
view the memory configuration of a selected module.
Line 1 of the Module Memory Screen, as shown in Figure 3-26, identifies the
module, and its current CPU loading factor, expressed as a percent of capacity.
module, and its current CPU loading factor, expressed as a percent of capacity.
Line 2 displays the amount of FLASH memory (in megabytes) installed on the
module.
module.
Line 3 displays the amount of SHARED DRAM and LOCAL DRAM (in
megabytes) installed on the module.
megabytes) installed on the module.
Figure 3-26. The Module Memory Screen
Select <EXIT> to return to the Module Specific Screen.
<EXIT>
MODULE xx
TEMP: xxx
°
F, xx
°
C NORM
INPUT PWR: xx.xV, OUTPUT PWR x.xV
FLASH xx MB
<EXIT>
MODULE xx, CPU LOAD xxx%
SHARED DRAM xx MB LOCAL DRAM xx MB