Cabletron Systems DMS-100 Manual De Usuario

Descargar
Página de 196
80   Chapter 3: EIU datafill
297-8991-910 Standard 03.01 August 1999
Sample datafill for table IPROUTER
Figure 17 shows sample datafill for table IPROUTER for an EIU.
Figure 17
Datafill example for table IPROUTER
Table IPHOST
Table IPHOST assigns the IP addresses to SuperNode end hosts. SuperNode
end hosts can have one or two addresses, depending on the entry in field
NODENAME.
Table IPHOST activates the TCP layer and its applications on those nodes.
Note: If the TCPCONN field in table IPHOST is set to 0, communication
in related applications stops.
Table IPHOST also supports application processor (AP) and file processor
(FP) datafill for both Support Operating System (SOS) nodes and for SOS
SuperNode UNIX (SNIX) nodes for which two IP addresses are needed.
ETHARP
YES or NO
Ethernet address resolution protocol
Enter YES if the EIU is to engage in
address resolution protocol (ARP)
activity within the Ethernet subnet.
Otherwise, enter NO.
The default value for this field is YES.
ETHPARP
YES or NO
Ethernet proxy address resolution
protocol
Enter YES if EIU is to  engage  in proxy
ARP activity on behalf of the
SuperNode hosts within the Ethernet.
Otherwise, enter NO.
The default value for this field is YES.
Table 13
Field descriptions for table IPROUTER for EIU datafill (continued)
Field
Subfield or
refinement
Entry
Explanation and action
 (Sheet 2 of 2)
RKEY              ROUTER         SNIPADR        ETHIPADR ETHARP ETHPARP
-----------------------------------------------------------------------
0
EIU 117
47 209 192 117
47
59 132 241
YES
YES