Cabletron Systems HSIM-W6 Manual De Usuario

HSIM-W6 User’s Guide

97

This section describes the fields in the IP Routing Configuration section of the (IP/IPX) Routing 
configuration window.

Displays an interface number assigned to an IP subnet.

Displays the IP subnet assigned to the interface number.

Displays the subnet mask assigned to the interface number.

The Next Hop is the IP address of the IP port of the next router (in the direction of 

the subnet that you are defining).

Displays the Default Route window. You may select one interface to be a 

default route. A default route forwards all packets that are not defined in the routing table out the 
interface defined in the Default Route window (Unnumbered Routing Only). To set up a default 
route in Numbered Mode communication, click the Add Route... button and enter IP Subnet 
000.000.000.000, and subnet mask 255.255.255.255. Then place the cursor in the Next Hop field 
and enter the IP address of the router you wish to designate as the default route.

These buttons allow you to add or delete a route and to configure the 

HSIM-W6 to forward only those packets from the specified route.

This button allows you to access the Advanced Routing configuration window.

This section describes the fields in the IPX Routing Configuration section of the (IP/IPX) Routing 
configuration window.

Displays all interface numbers that can be assigned an IPX network number.

Displays the active IPX network number assigned to an interface. 

The IPX Host Map button takes you to the IPX Host Map window. IPX Host Map 

entries are used for IPX routing in Frame Relay mode only. 

Use this button to change an entry in the IPX Routing Configuration section. Select 

the interface number to modify by clicking on the tab to the left of the Interface #.