Cabletron Systems HSIM-W6 Manual De Usuario

156

HSIM-W6 User’s Guide

Displays the amount of time elapsed since an IP address was assigned to 

the HSIM-W6.

Describes the selected Port.

Displays the physical (MAC) address of the HSIM-W6.

Displays the type of interface used by the specified port.

Displays the operational status of the selected port.

This section provides a general overview of the procedures required to configure the HSIM-W6. 
The following list describes each of the IPX General Config fields.

Use this field to select the routing port that you wish to configure.

Use this field to select the format of the frame in which IPX packets are encapsulated 

for transmission.

Use this field to set the Maximum Transmission Unit (MTU).

Use this field to enable IP Routing Services.

Use this field to enable IP Forwarding.

Use this field to assign an IP address to the port that you wish to configure.

Routing Services allows you to choose the ports that you want to configure for IPX routing. To 
select a router port to configure for IPX routing, complete the following steps:

Use the arrow keys to highlight the PORT field.

Type in the number of the port that you want to configure for IPX routing, then press ENTER.

You can type in the port number, or you can use the 

 command at the bottom 

of the screen to scroll through the list of the ports on your device. To use the 

command, use the arrow keys to highlight the 

(to go forward), or the 

 (to go 

backward), and then press ENTER to scroll through the available ports in the direction 
you have selected. You can also use the + and - keys to scroll through the available 
ports.