Cabletron Systems HSIM-W6 Manual De Usuario

32 HSIM-W6 User’s Guide

It is helpful to draw a diagram including all locations, addresses, router names, etc. This section 
includes diagrams needed to configure the HSIM-W6. You may need different addressing 
information depending on whether you are configuring IP routing and/or NetWare IPX routing.

An IP address and subnet mask are required for the Ethernet LAN for the 

router connection. Each remote router ISDN WAN link may have local and remote IP addresses 
and subnet masks depending on the type of IP addressing as shown in 

. The IP routing 

table in the HSIM-W6 can be “seeded” with addressing information for networks/stations beyond 
the remote router.

 

The diagrams show the information required to configure only the HSIM-W6. If you need 
to configure both ends of the WAN link, you should label all information for the network.

NETWORK INFORMATION LAYOUT

ETHERNET LAN
IP ADDRESS
SUBNET MASK
GATEWAY

ISDN LINE
SWITCH TYPE
SPIDs, DNs

ISDN

CSX200 WAN IP
ADDRESS
SUBNET MASK
(IF REQUIRED)

REMOTE ROUTER
WAN IP ADDRESS
SUBNET MASK
(IF REQUIRED)

REMOTE ISDN
PHONE NUMBERS

REMOTE ROUTER

ROUTER NAME
PAP/CHAP PASSWORD

REMOTE LAN NETWORK
IP ADDRESSES
SUBNET MASKS
METRICS

NETWORK AND STATIONS BEYOND
THE REMOTE ROUTER

PC

100_10

SYSTEM NAME
MESSAGE PAP/CHAP
PASSWORD

HSIM-W6