Cabletron Systems HSIM-W6 Manual De Usuario
Chapter 5: Installation
HSIM-W6 User’s Guide 51
Figure 11
Removing the WPIM Coverplate
3.
Remove and save the two HSIM faceplate screws attaching the faceplate to the HSIM printed
circuit board (PCB). Remove the HSIM faceplate (see Figure 3).
circuit board (PCB). Remove the HSIM faceplate (see Figure 3).
4.
Carefully align and gently insert the WPIM connector onto the WPIM connector pins on the
HSIM-W6.
HSIM-W6.
5.
Press down firmly on the WPIM until the pins slide all the way into the connector. Ensure that
the WPIM seats firmly on the standoffs.
the WPIM seats firmly on the standoffs.
6.
Secure the WPIM to the three standoffs using the screws that are provided with the HSIM-W6.
7.
Reattach the faceplate to the HSIM using the two screws saved in step 3.
WPIM
Coverplate
Standoff Screws
HSIM Standoffs