Cabletron Systems HSIM-G01 Manual De Usuario

To connect the HSIM-G01 using multimode and single mode fiber, and 
the HSIM-G09 using single mode fiber to the network, perform the 
following steps:

Remove the protective fiber port covers from the fiber optic ports and 
from the ends of the connectors.

Insert one end of the SC connector, key side down, into the HSIM-G. 
See 

. Refer to 

 for the proper fiber cable for the 

installation.

If connecting the HSIM-G09 to the network using multimode 
fiber cable as the premises cabling, refer to 

 

before following this procedure.

The HSIM-G uses Class 1 lasers. Do not use optical 
instruments to view the laser output. The use of optical 
instruments to view laser output increases eye hazard. When 
viewing the output optical port, power must be removed from 
the network adapter.

Leave the protective fiber port covers in place when the 
connectors are not in use to prevent contamination.

Do not touch the ends of the fiber optic strands, and do not let 
the ends come in contact with dust, dirt, or other contaminants. 
Contamination of the ends causes problems in data 
transmissions. If the ends become contaminated, blow the 
surfaces clean with a canned duster. A fiber port cleaning swab 
saturated with optical-grade isopropyl alcohol may also be 
used to clean the ends.