Cabletron Systems 9H532-17 Manual De Usuario
Installing the SmartSwitch 9000 Module
2-8
The Reset Switch
The Reset switch is located under the top plastic tab as shown in Figure 2-3.
Use the reset switch to reset the module’s processor, shutdown (power down) the
module, and/or restart the module.
Use the reset switch to reset the module’s processor, shutdown (power down) the
module, and/or restart the module.
•
To reset the module’s i960 processor, press the reset switch twice within three
seconds.
seconds.
•
To shut down the module, press and hold the reset switch for three or more
seconds.
seconds.
•
To restart the module, press the reset switch momentarily.
SNMP management may be used to disable this switch to enhance module
security.
security.
Figure 2-3. The Reset Switch
Reset Switch