Canon AXIS 1650 Manual De Usuario

60

AXIS 1650 User’s Manual

5. Select 

Events and select the event Canon MF3110 Scan Button.

Under 

Actions, select the option Start this program and select MF ToolBox 

Ver4.7 in the list.

Click [OK].

Now you have prepared your computer to automatically take care of 

scannings invoked from the Canon device.

Connect to the scanner with AXIS ScanClient  - see page 56 and place the 

object to be scanned on the scanner flatbed.

1. If the Canon device is in Energy Save mode, press its [Energy Saver key].

2. Press [Scan] on the Canon device.

3. Press [Start] on the Canon device.

4. The Canon device will start to scan. 

5. When ready, remove the scanned object from the flatbed and walk back to 

your computer.

6. Close the receiving program on your computer and disconnect from the 

When waking up from Power Off or Energy Save mode the Canon device 

needs some time (from 30 seconds to a few minutes) to adjust the light 

and the scanner to produce optimum scans. Press [Start] repeatedly until 

scanning starts.