Black Box 945 Manual De Usuario
9
WATLOW Series 945
How to Use Data Communications
Minutes: Represents the 24 hour time-of-day clock setting for minutes. Appears
if Prot = On and Log = tAbL, CHrt or SPCA, SPCd, SPCn. Parameter resets to
default after a power interruption. Range: 0 to 59
if Prot = On and Log = tAbL, CHrt or SPCA, SPCd, SPCn. Parameter resets to
default after a power interruption. Range: 0 to 59
Default: 0
Interval: Selects the time interval for the logging function. The logging interval is in
tenth of a minute increments. Appears if Prot = On and Log = tAbL, CHrt or
SPCA, SPCd, SPCn. Range: 0.0 to 60.0 minutes
tenth of a minute increments. Appears if Prot = On and Log = tAbL, CHrt or
SPCA, SPCd, SPCn. Range: 0.0 to 60.0 minutes
Default: 0.0
Tag: Selects what variables are to be transmitted out during the data logging
function. Any combination of process, set point and alarms may be "tagged" for
logging. Appears if Prot = On and Log = tAbL.
P = Process
function. Any combination of process, set point and alarms may be "tagged" for
logging. Appears if Prot = On and Log = tAbL.
P = Process
S = Set Point
A = Alarm Set Points
Range: PSA, PS -, P-A, P- -, -SA, -S-, --A, ---
Default: ---
Setup
Min
Int
tag
Table 1 -
Setup Menu
Prompts and
Descriptions.
Setup Menu
Prompts and
Descriptions.
Parameter
Value
Range
Factory Default
Appears If:
bAUd
300, 600, 2100, 2400, 4800, 9600
1200
dAtA
7 o = 7 data bits and odd parity
7E = 7 data bits and even parity
8 n = 8 data bits and no parity
7E = 7 data bits and even parity
8 n = 8 data bits and no parity
7 o
Prot
FULL = ANSI X3.28 2.2 - A.3
FULL
On = XON - XOFF
Addr
0 to 31
0
Prot = FULL
Log
OFF, tAbL, CHrt, SPC
OFF
Prot = On
LSL
SPCA = rL to Lower USL -2
°
F/-1
°
C
rL
Prot = On &
SPCd = 1 to 99
10
Log = SPCA, SPCd
USL
SPCA = rH to Upper LSL +2
°
F/1
°
C
rL
Prot = On &
SPCd = 1 to 99
10
Log = SPCA, SPCd
tbS
1 to 60
5
Prot = On &
Log = SPCA, d, n
Log = SPCA, d, n
LinE
10 to 127
65
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
YEAr
--
92
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
Mon
--
01
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
dAY
--
01
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
HOUr
0 to 23
0
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
Min
0 to 59
0
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
Int
0.0 to 60.0 minutes
0.0
Prot = On & Log = tAbL
CHrt or SPCA, d, n
CHrt or SPCA, d, n
tag
PSA, PS-, P-A, P--, -SA, -S-, --A, ---
---
Prot = On & Log = tAbL
P = Process S = Set Point
A = Alarm Set Points
A = Alarm Set Points
Setup Menu
Use this page as a master copy for your Series 945 data communications Setup
parameters. Do not enter any values here; make photocopies instead.
parameters. Do not enter any values here; make photocopies instead.
This parameter follows the Aut parameter in the Operation menu. See Page 25 for
more information.
more information.
Control Limit Update: When YES is selected, it calculates and prints out control
limits according to the time base. If no is selected, the current control limit is
printed and no subsequent limits are printed. Range: YES or no Default: YES
limits according to the time base. If no is selected, the current control limit is
printed and no subsequent limits are printed. Range: YES or no Default: YES
Operation Menu
CLUP