Bradley Smoker 1734-AENT Manual De Usuario

1

Publication 1734-UM011C-EN-P - January 2006

To communicate with your 1734-AENT adapter over your network 
you must configure the RSLinx Ethernet communication driver 
(AB_ETH) or the EtherNet/IP driver (AB-ETHIP). You can configure 
the AB_ETH driver with the IP addresses of all the Ethernet devices on 
your system. You need one of these drivers to download the example 
application programs in this manual.

See the table for a list of the contents of this appendix and where to 
find specific information:

Use this procedure to install RSLinx software on your computer.

1. Insert the CD in the CD-ROM drive.

Note that the CD-ROM supports Windows Autorun. Once 
inserted into the CD-ROM drive, if you have Autorun configured, 
the installation automatically starts at the first setup screen.

If Autorun is not configured for your CD-ROM drive, go to 
step 2.

2. From the Start menu, choose Run.

You see the Run dialog.

3. Type d:/setup (if it doesn’t appear automatically), where d: is 

your CD-ROM driver letter.

Configure the AB_ETHIP Driver

You must use series C POINT I/O modules with 
the 1734-AENT adapter. Series A or B POINT I/O 
modules will not work with this adapter.