Cabletron Systems WPIM-RT1 Manual De Usuario

This section describes the features of the WAN Interface Configuration 
screen. Access the screen by using the arrow keys to highlight the WAN 
INT CONFIG command field at the bottom of the WAN Physical 
Configuration screen, then press ENTER. The WAN Interface 
Configuration screen displays, as shown in 

This section describes the WAN Interface Configuration screen fields.

Interface Number (Modifiable)

Displays the active Interface Numbers. Used to configure the Interface 
Numbers that were assigned to the Timeslots on the WAN Physical 
Configuration screen.

Max Xmit Unit (Modifiable)

Displays the maximum packet size that can be transmitted on the selected 
interface. The default settings for this field depend on the Protocol 
Manager chosen.

ProtMgr Iface (Modifiable)

Interface number utilized for the Protocol Manager chosen.

WAN INTERFACE CONFIGURATION

Interface Number:    000
Max Xmit Unit:           0
ProtMgr Iface:          [0]
Active Protocol:        FR
          FR LMI:                [ANSI_94]
              DLCI Address:  0
              DLCI DCP En:
              DLCI DCP Stat:
              Comp Ratio:
              Circuit State: [Invalid]

2750_04

<host name> Local Management

Flash Image Version: xx.xx.xx

001
002
003
004
005
006
007
008
009
010
011
012
013
014
015

CKT# IF# LID

STATE

018
019
020
021
022
023
024
025
026
027
028
029
030
031
032

CKT# IF# LID STATE

016

017

001 Enet

UP

PORTS:
 [1-32 ]

002 Enet

DOWN