Avocent DSR2035 Manual De Usuario

56        DSR2035/8035 Switch Installer/User Guide

NOTE: You must have Administrator privileges to change SPC power control device settings.

If a target device is connected to an SPC power control device outlet, you may power up, power 
down or cycle (power target device down and then up) the target device using the DSR web server.

1.

Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer window. 
The SPC sockets window will appear.

2.

Select the checkbox to the left of the device that you wish to power.

3.

Click the On button. 

1.

Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer window. 
The SPC sockets window will appear.

2.

Select the checkbox to the left of the device that you wish to power down.

3.

Click the Off button. 

Display a list of devices attached to the 
DSR2035/8035 switch

Appliance - Connections

View the unit’s part number, serial number and 
EID number

Appliance - Properties - Identity

Enter or display the unit’s Site, Department 
and Location

Appliance - Properties - Location

Enable the inactivity timeout

Appliance - Appliance Settings - Sessions - KVM settings

Then, click the 

Enable Inactivity timeout box.

Change the unit encryption level

Appliance - Appliance Settings - Sessions - KVM settings

Then select the level of encryption desired for keyboard/
mouse signals and then video signals.

Change the modem time-out settings

Appliance - Appliance Settings - Ports - Modem