3com 4000 Manual De Usuario

Figure 2-4   AccessBuilder Ethernet AUI LAN Connection

1 Set the Token Ring 4M/16M speed switch to the appropriate ring speed 

and attach the AccessBuilder to your ring.

2 Install and connect your serial card (or cards) to your modems, 

CSU/DSU, ISDN line, etc. Refer to Appendix C for details.

If you plan to use TABM to manage the AccessBuilder over an IP 
network, be sure the TABM software has been installed and launched 
on your management workstation before you power up the 
AccessBuilder 4000. Otherwise the BootP requests (for assigning an IP 
address) issued by the newly installed AccessBuilder will not be “heard” 
by TABM.

Proceed to Chapter 3 to install the TABM software on your Windows 
workstation. Once TABM has been installed and launched, newly 
installed AccessBuilders on the network will be identified by the 
TABMTOOL utility (IP only).

AUI Connection 

ab4kbook  Page 9  Thursday, March 27, 1997  11:51 AM