3com 4000 Manual De Usuario

Version 4.0 of the Transcend AccessBuilder Manager application is 
provided on CD-ROM. An extraction utility is provided to automatically 
install the TABM software from the CD-ROM to your local hard drive, a 
network server hard drive, or onto two diskettes.

Once installed, TABM is then used to configure your AccessBuilder 
remote access servers. For convenience, basic configuration 
information can be collected using the Configuration Worksheets 
provided in Appendix D.

The following functional key conventions are used within TABM:

The following procedure assumes installation from diskettes. If you are 
installing from CD-ROM, refer to the instructions in the CD-ROM insert.

1 Start Microsoft Windows, and open the Program Manager window.

2 Insert the diskette labelled “Transcend AccessBuilder Manager for 

Windows, Diskette 1” into a diskette drive on the Windows 
workstation.

3 From the File menu, choose Run [Alt] + [F] + [R].

4 In the Run dialog box edit box type A:\SETUP and choose OK to invoke 

the installation utility.

If you used a diskette drive other than drive A, use that drive’s 
designator instead of A: before the SETUP command (for example, 
B:\SETUP).

5 The AccessBuilder Manager Setup dialog box appears with a message 

indicating initialization is occurring. After the initialization process has 
finished, the Welcome dialog box appears. Choose the Continue 
button to proceed with installation.

Apply

Apply changes made to the AccessBuilder, but leaves the dialog 
box open.

Change

Store the changes made locally without sending them to the 
AccessBuilder.

ab4kbook  Page 3  Thursday, March 27, 1997  11:51 AM