3com 3CRWEASYA73 Manual De Usuario
6
4
Attach the bridge with bracket to the plate already fixed to the pole.
5
Use the included nuts to secure the wireless bridge to the pole bracket. Note that the
wireless bridge tilt angle may need to be adjusted during the antenna alignment process.
Be sure to take account of the antenna polarization direction; all antennas in a link must be
mounted with the same polarization.
wireless bridge tilt angle may need to be adjusted during the antenna alignment process.
Be sure to take account of the antenna polarization direction; all antennas in a link must be
mounted with the same polarization.
Using the Wall-Mounting Bracket
Perform the following steps to mount the unit to a wall using the wall-mounting bracket:
1
Always attach the bracket to a wall with the flat side flush against the wall (see following
figure).
figure).
CAUTION: The wall-mounting bracket does not allow the bridge’s integrated antenna
to be aligned. It is intended for deployment using a 5.0 GHz external antenna.
to be aligned. It is intended for deployment using a 5.0 GHz external antenna.